Categories

System malfunctions and false alarms can be exasperating, and more importantly, could prevent your home’s security from working how it should. Thankfully, most troubles, from dead batteries to false alarms, are easy to fix. Explore our recommendations for troubleshooting your home alarm system in Brooklyn. We’ll help keep your family members protected and your system running the way it should.

Test Your Home Security System In Brooklyn

One of the most effective ways to troubleshoot your property’s defense is to test it yourself! The latest systems have a test mode so you don’t accidentally prompt an emergency response. Once in test mode, do the following:

• Arm your system as you would when leaving.
• Open a door or window protected by a contact sensor, or try to trip another device. Shut the door or window once you’re done so it doesn’t trip the alarm as you switch out of test mode.
• Permit the alarm to resonate for 60 seconds to make sure a signal is dispatched to the security provider and an entry is made in the alarm activity log.
• Proceed to test equipment as you wish
• Review the systems’s activity log to validate proper function.

No need to worry, monitoring professionals can see that your alarm system is involved in a test. Just be sure to switch out of test mode when complete. It’s smart to test every other month or anytime you change your home’s internet or phone service.

Check The Placement And Condition Of Motion Sensors

Although an integral element of your alarm system, motion detectors are prone to false alarms. Prevent them with some easy troubleshooting.

• Conduct a physical inspection. Are there objects that could shift within the sensor’s detection area, like a curtain caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can cause issues. Ensure the face is clean.
• Does the motion detector come with pet immunity you can activate? Some can be set to ignore pets up to 100 pounds.
• When was the battery replaced? Low batteries might impact performance or cause false alarms.
• Is a heat source impairing the sensor? Excessive heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Signals

One of the great things about the latest home security systems is that they’ll alert you when batteries are getting low. If your system is equipped with a control panel or app, you’ll usually find alerts there. Depending on your alarm, you could hear an occasional beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that should be replaced every 1 to 2 years. It’s wise to keep batteries ready and create a replacement schedule. Top systems also have a rechargeable backup battery for the main control panel. This backup battery keeps your system running if you have a power outage and should charge back up once the electricity is working again. If it doesn’t, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Brooklyn 

As the foremost name in home security, ADT designs systems that offer unsurpassed protection and functionality. Getting into test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always receive updates when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Brooklyn home and family. Call (212) 553-6593 or complete our form today!